Download Print this page

Side-Power S-link PJC-212 User Info

Control panel with can-bus connection
Hide thumbs Also See for S-link PJC-212:

Advertisement

Quick Links

USER INFO
TECH INFO
PJC-212 Control panel
PJC-212
Control panel with S-link

Product features

• For proportional thruster control with the new Power Controlled DC-thrusters
• Finger tip control speed control with purpose designed joysticks
• Hold - function for easy docking, runs thrusters at selected power
• Back-lit LCD display with instant feedback
-
System status
-
Amount of thrust & direction of thrust
-
Thruster temperature/remaining run time
-
Battery supply voltage to thrusters
-
Monitoring of Automatic Mainswitch (informs if the fuse has blown
or the manual override is activated)
• Interactive multi-language menus
• CAN-Bus communication with thrusters and accessories
• Plug & play cables, waterproof and compact connectors
• System setup via "wizard"
• Diagnostics via panel/computer interface
• Built-in audible alarm "buzzer"
• Connector for external "buzzer"/loud audible alarms
Holding function for auto-
running of bow and stern
thrusters together in the
direction of the arrows at
selected power
Press "+" for more and
"-" for less power.
Information display, see
next page for details.
Press both "ON" buttons
simultanously to activate
control panel.
SIDE-POWER
SIDE-POWER
THRUSTER SYSTEMS
THRUSTER SYSTEMS
MENU
Press to change
Press to access menu
between day and
system and choose
night light
items in menus
CAN-bus connection
Speed control joystick for
bow thuster
Speed control joystick for
stern thuster
Press to de-activate
control panel or cancel or
go back in menu system
CONFIDENCE BY CONTROL
S-link
User info, PJC-212 - 1/4

Advertisement

loading
Need help?

Need help?

Do you have a question about the S-link PJC-212 and is the answer not in the manual?

Questions and answers

Summary of Contents for Side-Power S-link PJC-212

  • Page 1: Product Features

    Speed control joystick for Holding function for auto- bow thuster running of bow and stern thrusters together in the Speed control joystick for direction of the arrows at stern thuster selected power Press “+” for more and “-” for less power. Information display, see next page for details. Press both “ON” buttons simultanously to activate control panel. Press to de-activate control panel or cancel or go back in menu system MENU Press to change Press to access menu between day and system and choose night light items in menus SIDE-POWER SIDE-POWER THRUSTER SYSTEMS THRUSTER SYSTEMS CONFIDENCE BY CONTROL User info, PJC-212 - 1/4...
  • Page 2 As bars empties you have less you have less run you have less you have less run power and less time left. power and less time left run time left run time left DISPLAY WHEN ALARMS: When there is a problem or a fault, the panel will show this alarm situation by the LCD display blinking in red color. The panel will also change to show “Alarm Info” beneath the “boat”, indicating that by pressing the corresponding button (centre ON) you will get information about what the problem is (example below). MENU MENU MENU If the problem is that the voltage delivered from the batteries are too low for the thruster to be allowed to run, this is shown directly on the display by the battery that is not delivering being replaced by the alarm sign (see example). If the issue is something else, the alarm signal will replace the remaining run time indicator for the thruster / system that is causing the alarm. SIDE-POWER SIDE-POWER THRUSTER SYSTEMS THRUSTER SYSTEMS CONFIDENCE BY CONTROL User info, PJC-212 - 2/4...
  • Page 3 “scanning system” for 30 sec- onds. Then you can see the parts by moving between the bow and stern SYSTEM thruster screens with the stern joystick. If you add components to the S-link system you have re-scan it by se- lecting “Config” and you will then have to tell the system which thruster is bow and which is stern by testing with the corresponding joystick and if it is opposite, press the key marked “Move” in the display. SIDE-POWER SIDE-POWER THRUSTER SYSTEMS THRUSTER SYSTEMS CONFIDENCE BY CONTROL User info, PJC-212 - 3/4...
  • Page 4 35% of remaining time it will start sounding a single “bip”, then two “bips” and three “bips” etc. the closer you get to auto shutdown In “HOLD” (auto running) both thrusters will shut down when the safe run- ning of any of the thrusters is reached. Using the joysticks you can use the “other” thruster even if one is shut down because of heat, low voltage or other issue. Updated for control panel software version 1.004 - 26.04.2010 SIDE-POWER SIDE-POWER THRUSTER SYSTEMS THRUSTER SYSTEMS CONFIDENCE BY CONTROL User info, PJC-212 - 4/4...