Intuicom RTK Bridge-X Installation Manual page 9

o Scroll down to the page where the Input was configured before
o Scroll down to the NMEA1 screen
• Configuration is now complete. You should be sending GPS/GNSS positioning data
from the Trimble 252/262/372 to the Intuicom RTK Bridge–X.
For Technical Support of the RTK Bridge-X, Intuicom recommends
"Intuicom Remote Support", please contact Intuicom for details on this real-
For general technical support, please contact us at
Version 1.0
Set the O (output) to NMEA with a Baud Rate of 38k4
Enable the GGA string (CAPS is enabled)
time support program.
call us at 303.449.4330.
Section 2: Installation Instructions
support@intuicom.com
8
or
Intuicom, Inc.