Range Of Application And Certifications; Important User Instructions - Festo CMXR-C2 Assembly And Installation Manual

Contents and general safety instructions
The central module is not intended for safety-relevant control tasks (e.g. emergency stop).
Additional external protective measures, which guarantee the safe operating status of the
system even in the event of a malfunction, must be implemented for safety-relevant
control tasks or personal safety.

Range of application and certifications

The product fulfils the requirements of EC directives and bears the CE marking.
Standards and test values, which the product must comply with and fulfil, can be found in
the section "Technical data". The product-relevant EC directive can be found in the
declaration of conformity.
Certain product configurations have been certified by the Underwriters Laboratories Inc.
(UL) for the USA and Canada. These configurations are marked as follows:
UL Listing Mark for Canada and the United States
Certification conditions/requirements for UL-compliant application:
Only class 2 power sources may be used for the electrical supply ("only for use in Class 2
circuits").
The modules for the multi-axis control system CMXR-C2 described here are "open type
equipment" and must therefore be installed into a control cabinet.
All modules with front panel power supply must be protected with a back-up fuse. A 10 A
fuse is recommended.

Important user instructions

Danger categories
This description contains instructions on the possible dangers which can arise if the
product is not used correctly. These instructions are marked (Warning, Caution, etc.),
printed on a shaded background and marked additionally with a pictogram. A distinction
is made between the following danger warnings:
Notes on the present description
Festo GDCP-CMXR-C2-HW-EN 1002NH
Warning
... means that failure to observe this instruction may result in
serious personal injury or material damage.
9