Equipment Overview; Description; Front And Top Views - Adaptive Micro Systems AlphaEclipse 3600 A Series Installation Instructions Manual

September 28, 2004

Equipment overview

Description

Front and top views

Shown below is a 64 x 32 pixel sign with the wireway on the right side of the sign. Other sign sizes are similar.
Top view
Front view
A
Item Name
A Cube
B Lifting hooks
C Wireways
D Light sensor hole
6
B
Consists of four LED modules:
Each LED module
can be removed
from the front of
the sign.
Used to lift the sign during installation. These hooks should be removed after the sign is installed.
Used to route power and communication wires to all the LED modules. Wireways may be mounted on
either the left or the right side of a sign:
Left side
wireway
Allows light into the light sensor. This opening should be kept free of obstructions.
AlphaEclipse 3600 Series A Sign Installation Instructions (9711-8001C)
Description
Each LED module is 8 pixels tall by 8 pixels wide
(8 x 8). So each cube is 16 x 16 pixels.
C
D
A single
LED pixel.
Right side
wireway
Equipment overview