Lifting The Sign - Adaptive Micro Systems AlphaEclipse 3600 A Series Installation Instructions Manual

September 28, 2004

Lifting the sign

Use the two lifting hooks on the sign with a lifting bar to raise the sign:
NOTE: After mounting the sign, remove the lifting hooks.
Lifting bar
RECOMMENDED
14
AlphaEclipse 3600 Series A Sign Installation Instructions (9711-8001C)
Crush hazard.
Do not lift sign
with more than a
15 degree tilt.
WARNING
Possible crush hazard.
Always use lifting bar
to lift the sign. Otherwise
eyebolts may break and
sign may fall, causing
serious injury or death.
SM1015
Lifting hooks
Figure 1: Sign lifting methods
WARNING
SM1020
WARNING
Possible crush hazard.
Always use eyebolts to lift
sign. Otherwise the sign
may fall, causing serious
injury or death.
NOT RECOMMENDED
SM1017
Installation