Related Manuals for Adaptive Micro Systems Alpha 4000 RGB NEMA 12
Summary of Contents for Adaptive Micro Systems Alpha 4000 RGB NEMA 12
- Page 1 Installation Manual Alpha 4000 RGB NEMA 12 4000 RGB NEMA 12, I (PN 1778600401 R . B) LPHA NSTALLATION ANUAL...
- Page 2 Milwaukee, WI 53224 USA 414-357-2020 414-357-2029 (fax) http://www.adaptivedisplays.com Adaptive is a registered trademark of Adaptive Micro Systems. All other brand and product names are trademarks or registered trademarks of their respective companies. 4000 RGB NEMA 12, I (PN 1778600401 R .
-
Page 3: Table Of Contents
INTRODUCTION Introduction ............1-4 Sign overview. -
Page 4: Introduction
NTRODUCTION Introduction The Alpha 4000RGB NEMA 12 displays are full color Industrial grade displays designed to NEMA 12/IP52 standards which are intended for indoor use only. Performance scoreboards communicate critical information to Production Operators and Managers for an effective productivity improvement program, ensuring KPIs are met, eliminating waste and increasing productivity. -
Page 5: Installation
Temperature protection The Alpha 4000 RGB NEMA 12 sign includes automatic temperature controls to determine when the internal temperature of the sign is too hot to continue normal operation. The temperature controls are based on the internal temperature of the sign, which is influenced by the ambient temperature, the sign's display load, and the duration the sign is on. -
Page 6: Connecting The Power Wires
NSTALLATION Connecting the power wires: WARNING! Hazardous voltage, contact with high voltage may cause death or serious injury. Always disconnect power to unit prior to servicing. 1. Begin by removing the four 8-32 Phillips screws holding the rear power access panel (take care not to lose these screws). -
Page 7: Connecting The Communication Wire(S)
NSTALLATION Connecting the communication wire(s): WARNING! Hazardous voltage, contact with high voltage may cause death or serious injury. Always disconnect power to unit prior to servicing. 1. Begin by removing the four 8-32 Phillips screws holding the rear communication access panel (take care not to lose these screws). -
Page 8: Sign Specifications
NSTALLATION II. RS485 Communication: • Connect the incoming serial wires (bare-wire connection) to the following terminal connection points. • Shielded RS485 cable is recommended. Connect shield of cable to SHIELD terminal. • RS485 connection to RS485-(A) and RS485-(B) terminal. • Termination is recommended at both ends of all RS485 buses. -
Page 9: Wall Mounting
NSTALLATION Wall mounting Guidelines Wall-mounting brackets and fasterners are provided with the sign. Hardware to secure the brackets to the wall will vary based on the type of material (e.g., concrete, brick, wood) and are not included. • The hardware for attaching to the mounting •... -
Page 10: Ceiling Mounting
NSTALLATION Ceiling mounting Guidelines The ceiling mounting brackets and fasteners are provided with the sign. These brackets allow the customer to hang the sign with the appropriate braided wire or chain or rope, etc. The mounting wire/chain is not provided. The maximum weight of the 4240 unit is approximately 22 pounds. -
Page 11: Start-Up
TART Start-up After installing a sign according to the previous sections, make sure the unit is installed properly by applying power to it. It may take up to 30 seconds for the loading icon to appear. Then, information similar to the following should display on the sign if Alpha Net Player is installed. -
Page 12: Compliance
Supplier's Declaration of Conformity 47 2.1077 Compliance Information Unique Identifier: 1778851037 – ALPHA 4120RGB,NEMA 12,120X016,120-240PRI 1778851067 – ALPHA 4240RGB,NEMA 12,240X016,120-240PRI Party issuing Supplier’s Declaration of Conformity ADAPTIVE Micro Systems LLC 7840 N 86 Street Milwaukee, WI 53224 http://www.adaptivedisplays.com/ Responsible Party – U.S. Contact Information... - Page 13 1778600401 R UMBER Adaptive Micro Systems 7840 North 86th Street Milwaukee, WI 53224 USA 414.357.2020 www.AdaptiveDisplays.com...