Removing The 3.75G Module - Clevo W130HU Service Manual

Removing the 3.75G Module

1. Turn off the computer, turn it over, and remove the battery
2. The 3.75G module will be visible at point
3. Carefully disconnect the cable
4. The 3.75G module will pop-up, and you can remove it from the computer
4
a.
b.
3
2
(page 2 -
on the mainboard (Figure
1
, and then remove the screw
2 3
c.
1
5) and the component bay cover
9a).
(Figure 9b) .
(Figure 9c).
4
4
Removing the 3.75G Module 2 - 13
Disassembly
Figure 9
3G Module Removal
(page 2 - 9).
a. Locate the 3.75G mod-
ule.
b. Disconnect the
and remove the screw.
c. The module will pop-up
and remove the 3.75G
module.
Note: Make sure you
reconnect the antenna
cable to socket.

4. 3.75G Module
• 1 Screw
cable