Removing The Keyboard - Clevo W130HU Service Manual

Removing the Keyboard

1. Turn off the computer remove the battery
-
2. Remove screws from the bottom of the computer.
1 4
3. Carefully raise the keyboard up, being careful not to bend the keyboard ribbon cable
from the plate.
9
.
4. Remove the plate
10
5. Disconnect the keyboard ribbon cable
6. Carefully lift up the keyboard
a.
1
2
b.
5
6 8
7
9
(page 2 - 5), and the component bay cover
from the locking collar socket
11
off the computer.
13
3
4
c.
10
(page 2 - 9).
. and remove screws
5
(Figure 11c)
12
d.
11
12
e.
13
Keyboard Tabs
Disassembly
Figure 11
Keyboard Removal
a. Remove screws from the
bottom of the computer.
-
6
b. Remove screws from
the plate.
c. Remove the plate.
d. Carefully lift the key-
board up and disconnect
the keyboard ribbon ca-
ble from the locking col-
lar socket.
e. Remove the keyboard.

Re-Inserting the
Keyboard
When re-inserting the
keyboard firstly align the
four keyboard tabs at the
bottom (Figure 11e) at
the bottom of the key-
board with the slots in the
case.

10. Plate for keyboard
13. Keyboard
• 8 Screws
Removing the Keyboard 2 - 15