Removing The 3.75G Module - Clevo W253CZQ Service Manual

Removing the 3.75G Module

1. Turn off the computer, turn it over, and remove the battery
2. Carefully disconnect the cable
3. The 3.75G module (Figure
4
a.
b.
3
(page 2 -
, then remove the screw from the module socket.
1 2
7b) will pop-up, and you can remove it from the computer
c.
1
2
d.
5) and the component bay cover
(Figure 7c).
3
Removing the 3.75G Module 2 - 11
Disassembly
Figure 7
3G Module Removal
(page 2 - 9).
a. Disconnect the
and remove the screw.
b. The module will pop-up.
c. Remove the 3.75G mod-
ule.
Note: Make sure you
reconnect the antenna
cable to socket.

3. 3.75G Module
• 1 Screw
cable