Removing The Wireless Lan Module - Clevo W130HU Service Manual

Disassembly

Removing the Wireless LAN Module

Figure 10
Wireless LAN
1. Turn off the computer, turn it over, and remove the battery
Module Removal
2. The Wireless LAN module will be visible at point
3. Carefully disconnect the cables
a. Locate the WLAN Mod-
4. The Wireless LAN module
ule.
b. Disconnect the cable
and remove the screw.
a.
c. The WLAN module will
pop up.
Note: Make sure you
reconnect the antenna
cable to the "1 + 2"
socket (Figure 10b).
b.

4.Wireless LAN Module
• 2 Screws
2 - 14 Removing the Wireless LAN Module
- , and then remove the screw
2 3
(Figure 10c) will pop-up, and you can remove it from the computer.
4
1
4
2
3
(page 2 - 5) and the component bay cover
on the mainboard (Figure 10a).
1
(Figure 10b)
4
d.
c.
4
(page 2 - 9).
.
4