Removing The 3.75G Module - Clevo W251HSQ Service Manual

Disassembly

Removing the 3.75G Module

Figure 10
3G Module Removal
1. Turn off the computer, turn it over, and remove the battery
2. The 3.75G module will be visible at point
a. Locate the 3.75G mod-
3. Carefully disconnect the cable
ule.
4. The 3.75G module
b. Disconnect the cable
and remove the screw.
c. The module will pop-up.
d. Remove the 3.75G mod-
a.
ule.
Note: Make sure you
reconnect the antenna
cable to socket.
b.

4. 3.75G Module
• 1 Screw
2 - 14 Removing the 3.75G Module
, and then remove the screw
2
(Figure 10c) will pop-up, and you can remove it from the computer
4
1
a.
2
3
(page 2 - 5) and the component bay cover
on the mainboard (Figure 10a).
1
(Figure
3
c.
4
(page 2 -
10b) .
(Figure 10d).
d.
4
9).