Removing And Installing A Processor - Clevo W130HU Service Manual

Disassembly

Removing and Installing a Processor

Figure 6
Processor Removal
Processor Removal Procedure
1. Turn off the computer, turn it over, and remove the battery
a. The CPU heat sink will
2. The CPU heat sink will be visible at point
be visible at point A .
3. Loosen the CPU heat sink screws in the order
b. Remove the screws from
4. Grip the heat sink tab
the CPU heatsink.
c. Grip the heat sink tab
puter
and carefully lift the heat
sink up and off the com- a.
puter.
b.

5. Heat Sink
• 3 Screws
2 - 10 Removing and Installing a Processor
and carefully raise the heat sink
4
(Figure 6c).
A
2
(page 2 - 5) and the component bay cover
(Figure 6a).
A
, &
(the reverse order as indicated on the label
2
3 1
up to an angle of around 30° and lift it up off the com-
5
c.
5
3
1
(page 2 - 9).
Figure 6b).
4