Removing And Installing A Processor - Clevo W251ELQ Service Manual

Removing and Installing a Processor

Processor Removal Procedure
1. Turn off the computer, turn it over, and remove the battery
2. The CPU heat sink will be visible at point
3. Loosen the CPU heat sink screws in the order
4. Grip the heat sink tab and carefully lift the heat sink
a.
3
2
b.
(page 2 -
(Figure 7a).
A
, & (the reverse order as indicated on the label
3 2 1
up and off the computer
7
A
1
4
5) and the component bay cover
(Figure 7b).
Removing and Installing a Processor 2 - 11
Disassembly
Figure 7
Processor Removal
(page 2 - 8).
a. The CPU heat sink will
be visible at point
Remove the screws from
Figure 7a).
the CPU heatsink.
b. Grip the heat sink tab
and carefully lift the heat
sink up and off the com-
puter.

4. Heat Sink
• 3 Screws
A
.