Installation - Matrox Radient eV-CXP Installation And Hardware Reference

14 Chapter 1: Introduction
More information
Need help?

Installation

The installation procedure consists of the following steps:
1. Complete the hardware installation procedure described in Chapter 2: Hardware
installation.
2. Complete the software installation procedure described in the documentation
accompanying your software package.
For information on using multiple Matrox Radient eV-CXP boards, refer to
Chapter 3: Using multiple Matrox Radient eV-CXP boards.
For in-depth hardware information, refer to Chapter 4: Matrox Radient eV-CXP
hardware reference; whereas for a summary of this information, as well as
environmental and electrical specifications, and connector pinout descriptions,
see Appendix B: Technical information.
This manual occasionally makes reference to a MIL-Lite function. However,
anything that can be accomplished with MIL-Lite can also be accomplished with
MIL.
If you experience problems during installation or while using this product, refer
to the support page on the Matrox Imaging web site:
www.matrox.com/imaging/support. This page provides answers to frequently
asked questions, as well as offers registered customers additional ways of obtaining
support.
If your question is not addressed and you are currently registered with the MIL
maintenance program, you can contact technical support. To do so, you should
first complete and submit the online Technical Support Request Form, accessible
from the above-mentioned page. Once the information is submitted, a Matrox
support agent will contact you shortly thereafter by email or phone, depending
on the problem.