Technical Data - Hilti SF 14-A Operating Instructions Manual

Status
4 LEDs flash, the power tool is not
in working order.
Battery charge status cannot be displayed while the control switch is
pressed and for up to 5 seconds after releasing the control switch.
If the battery display LEDs blink, please observe the instructions given
in the Troubleshooting section.
3.5 Items supplied
Drill / driver, side handle, operating instructions.
Spare parts, consumables and accessories approved by Hilti for use
with the product can be found at your local Hilti Center or online at:
www.hilti.group
4

Technical data

4.1 Technical data
Rated voltage
Weight
Speed in 1st gear
Speed in 2nd gear
Speed in 2nd gear
Torque
Hammering speed when drilling in 3rd
gear
Hammer drilling in masonry (max. length
100 mm)
Ambient temperature for operation
Storage temperature
10 English
Printed: 02.05.2019 | Doc-Nr: PUB / 5152170 / 000 / 03
Meaning
The power tool is overloaded or has
overheated.
SF 14-A
14.4 V
2.3 kg
0 /min ...
400 /min
0 /min ...
1,300 /min
0 /min ...
2,250 /min
2 Nm ...
12 Nm
•/•
•/•
−17 ℃ ...
60 ℃
−20 ℃ ...
70 ℃
SFH 14-A
14.4 V
2.4 kg
0 /min ...
400 /min
0 /min ...
1,300 /min
0 /min ...
2,250 /min
2 Nm ...
12 Nm
40,500 /min
4 mm ...
12 mm
−17 ℃ ...
60 ℃
−20 ℃ ...
70 ℃