Page 1
SF 10W-A22/ SF 8M-A22 Bedienungsanleitung Operating instructions Mode d’emploi Istruzioni d’uso Manual de instrucciones Manual de instruções Gebruiksaanwijzing Οδηγιες χρησεως Használati utasítás Instrukcja obsługi Инструкция по зксплуатации Návod k obsluze Návod na obsluhu Upute za uporabu Navodila za uporabo Ръководство за обслужване...
In these operating instructions, the designation “the tool” always refers to the SF 10W-A22 or SF 8M‑A22 cordless Always keep these operating instructions to- drill driver with battery fitted. gether with the power tool.
Symbols number on the side of the casing. Make a note of this data in your operating instructions and always refer to it when making an enquiry to your Hilti representative or service department. Type: Rated speed Revolutions Direct Drilling...
Page 7
2.1.4 Power tool use and care 2.2 Drill safety warnings a) Do not force the power tool. Use the correct a) Wear ear protectors when impact drilling. Expos- power tool for your application. The correct power ure to noise can cause hearing loss. tool will do the job better and safer at the rate for b) Use auxiliary handle(s), if supplied with the tool.
3 Description 3.1 Use of the product as directed The SF 10W-A22 and SF 8M-A22 are hand-held, cordless drill / drivers designed for driving and releasing screws and drilling in steel, wood and plastic. Do not use the battery as a power source for other unspecified appliances.
NOTE Approved accessories are available from your Hilti Center or can be ordered online at www.hilti.com. 3.3 Charge state and overheating indicator display on the Li-ion battery When the lithium-ion battery is in use, the charge status can be indicated by gently pressing one of the battery release buttons (press until resistance is felt - do not release the battery).
Pull the battery out of the locked position (working posi- Observe national and international transport regulations tion) and move it into the first latching position (transport when shipping batteries (transportation by road, rail, sea position). or air). 6 Operation CAUTION 6.4 Switching on / off Working on the material may cause it to splinter.
- If use continues, further battery discharge will be not use a spray, steam pressure cleaning equipment or stopped automatically before the battery cells suffer damage. - Charge the batteries using the specified and approved Hilti battery chargers for Li‑ion batteries. 8 Troubleshooting Fault Possible cause Remedy The power tool doesn’t run.
Batteries that have reached the end of their life must be disposed of in accordance with national regulations or returned to Hilti. Most of the materials from which Hilti power tools or appliances are manufactured can be recycled. The materials must be correctly separated before they can be recycled. In many countries, Hilti has already made arrangements for taking back your old power tools or appliances for recycling.
11 EC declaration of conformity (original) Hilti Corporation, Feldkircherstrasse 100, Designation: Cordless drill / driver FL‑9494 Schaan Type: SF 10W-A22 / SF 8M- Generation: Year of design: 2012/2015 We declare, on our sole responsibility, that this product Paolo Luccini Tassilo Deinzer...