Setting The Target Zone Alarm - Acumen Hydra-Alert HRM EON-2027HS Instruction Manual

Step 2
Upper Limit (blinking)
- Press STR/LAP Button
Button
C
- Press MODE/NXT Button
next item.
Step 3
Lower Limit (blinking)
- Press STR/LAP Button
Button
C
- Press MODE/NXT Button
to the Heart Rate Mode.
Note: Press SET Button
Percentage of your Maximum Heart Rate in the Setting Mode.

Setting the Target Zone Alarm

If you set the T arget Zone Alarm to ON, the watch will beep when you are
above or below the selected T arget Zone. From the Select TZ Mode, press
& hold STP/RESET Button
ON is indicated by the " " icon.
From the Select TZ Mode, press MODE/NXT Button
to the Analog Time Display.
44
B
to adjust the value.
D
B
to adjust the value.
D
to toggle between the heart rate limit in BPM or
A
C
or STP/RESET
to proceed to the
or STP/RESET
to exit and return
to set the T arget Zone Alarm to ON or OFF .
D
D
four times to return
D
B
C
B
C