Acumen Hydra-Alert HRM EON-2027HS Instruction Manual page 52

Step 2
Number of Cycle (blinking)
- Press STR/LAP Button
Button
C
for continuously )
- Press MODE/NXT Button
next item.
Step 3
Time for Timer1 (blinking)
- Press STR/LAP Button
Button
C
seconds or 60 minutes).
- Press MODE/NXT Button
next item.
Step 4
Time for Timer2 (blinking)
- Press STR/LAP Button
Button
C
seconds or 60 minutes).
less 1 minute, the
for 1 second for indication.
- Press MODE/NXT Button
to the Interval Timer Mode.
From the Interval Timer Mode, press MODE/NXT Button
return to the Analog Time Display.
48
B
to adjust the value
.
D
B
to adjust the value (range, 5 - 59
D
B
to adjust the value (range, 5 - 59
If the interval timer is set
" "
sec on the display will flash
D
or STP/RESET
(range, 1~9 and C
to proceed to the
or STP/RESET
to proceed to the
or STP/RESET
to exit and return
D
D
D
three times to
D
B
C
B
C
B
C