Table of Contents
Advertisement
4. Moisten the transmitter electrodes by applying a small drop of water on
each of the two contact areas. (Fig. 3)
Fig. 3
Using your watch
The watch does not have to be worn on your wrist to register your heart
rate, but it must be within 3 feet of your transmitter belt.
You must be in the Chrono Mode to view the heart rate information. Press
MODE/NXT Button
four times to enter Chrono Mode.
D
Note:
If the watch receives no heart rate signal for 15 seconds, Heart Rate Mode
will automatically turn off. To reactivate the Heart Rate Mode, press and
hold SET button
while in the Chrono Mode.
A
TM
TM
The Hydra-Alert
with advanced Fluid Check
feature, for best estimate
your Fluid Loss and calories, please do MET Calibration before exercise.
(refer to Page 37 )
17
Advertisement
Table of Contents
