the FI in the sense of being able to set the oscillators to different pitches to give a
polyphonic output. With the clever use of Flexi Controllers routed to oscillator pitches,
you can even change the chord quality on the fly.
If you are using the FI purely as a substitute for a single-effect pedal such as chorus,
distortion, flange, etc. (where the synthesizer section is not in use) then of course you
can play with full chordal input.
● Where have all the "bass" sliders gone?
As already mentioned, though the FI was originally a pedal for bass guitar, it can now
be used with a variety of instruments, thus we deemed it necessary to change the
names of the "BASS" sliders to "INSTR" (instrument) to reflect this. Rest assured,
they function in exactly the same way as they did before.
● My tuner is out of tune - how can I fix it?
If you have updated your FI's firmware to 3.00 from an older version then the tune
base will not be at 440 and so the tuner will show "incorrect" pitch values. You must
reset the tune base. (See the section on the
b oot menu
for how to do this.)
70