Table of Contents
Advertisement
To change the order of the patches, you need to change the two-digit numerical
prefixes at the beginning of the names of the files you wish to move. The prefix
corresponds to the slot number on the pedal that the program will be sent to. When
you have renamed the programs you wish to rearrange (taking care to avoid any
duplication of prefix numbers) then click W RITE ALL t o write the programs in the
folder to their newly chosen locations on the pedal.
● How do I listen to and add new sounds to my pedal?
Firstly you'll need to download the Program files of any sounds which you want to
audition. It will be helpful to place these all in a single folder on your computer as it
will make browsing quicker. Connect your FI to your computer with two MIDI cables
as shown in the question above. (If you just wish to audition sounds without writing
them to the FI then you only need to connect one cable from the MIDI OUT of your
computer to the MIDI in of the FI.)
Launch the editor and in the F ile menu click on L oad Program a nd click the first
program in the folder containing your candidate programs. You should now be able to
hear it when you play. Click on the + button to move to the next sound in the folder.
If you have found a sound you like and want to write it to the pedal, click on the
WRITE ONE button in the top left of the editor screen. Locate the program file. If the
file name begins with a two-digit numerical prefix then this is the location (slot) on the
pedal to which it will be written. If you want to write it to a different slot, first r ename
the file, prefixing the name with the two-digit slot number of your choice. When you
are ready to write the program to your pedal, either double click the file or click O pen .
If you want to write multiple programs to the pedal at once, make sure they are all in
a single folder. Go to the F ile m enu, click S elect Directory a nd locate the folder.
Make sure that all files in the folder that you want to write to the pedal have a u nique
two-digit prefix corresponding to the slots you want them to be sent to. Click the
WRITE ALL b utton to send the programs to the FI.
● Does the FI have MIDI clock?
No, the FI does not currently send or respond to MIDI clock signals.
● Can I use an expression pedal to sweep the filter?
Yes, you can! The filter cutoff in the FI is controlled by MIDI CC 11 and CC74. The
pedal sweeps either 1, 2 or 4 octaves either side of the program's preset cutoff value
(the value set by the V CF FRQ slider in the editor). The sweep range is set by V CF
CONTROL RANGE in the
You will need a third-party piece of equipment to connect the expression pedal to the
FI's MIDI In port.
● How do I use an expression pedal to control the LFO depth?
b oot menu
.
68
Hide quick links:
Advertisement
Table of Contents
