Midi Thru (“Tru”) - Panda-Audio Future Impact v3 User Manual

■ Any notes that are now played via MIDI will be set to transpose down
by 50 cents upon exiting Detune Mode.
Pressing the ON/OFF switch again will exit Detune Mode and the altered
(detuned) scale can now be played.
Note that the detuned scale will not be stored in flash memory, but must
instead be initialized "on the fly" anytime you want to use it. This is not
important for SYNTH (though it does not hurt) but it is useful for EWI.
The difference between Synth and EWI Modes is only in the initialization of
MIDI CC values. For completeness here are the initialization values in all
Instrument Modes:
Bass/Split/Guitar
Mode Synth
EWI
Note:​ T​ h ese MIDI CCs will be initialized to their default values on startup, on every
program change and whenever the editor changes a Flexi source.
● MIDI THRU ("trU")
Value: 0, 1 (Default on reset is 0.)
If set to 0 then MIDI information presented to MIDI IN will ​ n ot ​ be passed to MIDI
OUT.
If set to 1 then all information presented to MIDI IN ​ w ill ​ be passed to MIDI OUT.
MIDI CC
1 2 5
127 127 127
0 127 127
127 127 0
7 11 65
127 64 127
127 64 127
127 64 127
74
64
64
64
16