Faqs; Warranty And Return Policy - Panda-Audio Future Impact v3 User Manual

Warranty and Return Policy

You must never send back a device without consulting us by email first. A device should be
returned to us only after consultation and if we have explicitly requested that it be returned.
You must pay for the cost of shipping the device back to us. It is up to you which shipping
service you use for the return, but it is your responsibility to ensure that we receive the
device. The cost of repairing the device and sending it back to you will be covered by us
during the warranty period of two years. After the warranty has expired, the cost of repairing
and postage (both ways) must be paid by you. It is our responsibility to ensure that the
device is received by you.

FAQs

● How do I access the tuner?
Press and hold the ON/OFF switch to turn the tuner on; press the switch again to turn
it off.
● How do I choose which sound plays when the pedal is first powered on?
The FI always starts up at the most recently-saved program. Navigate to the program
you want to have as the start-up sound using the PROGRAM switch. Turn the EDIT
dial one click in one direction, one click in the other direction then press the dial again
to save.
Note: if you subsequently edit another program's parameters and save the changes,
then ​ t hat ​ p rogram will become the new startup program.
● How do I change the order of sounds on my pedal?
If you have never yet sent programs to your FI then the likelihood is that you are still
using the default sounds on the FI. For the purposes of answering this question, let's
suppose this is the case. You'll need to connect the FI to your computer using two
MIDI cables as shown below. Launch the editor and go to the ​ M IDI>Preferences
menu. Connect the cables and choose the MIDI ports as follows:
○ MIDI interface MIDI OUT (assigned to Output Device) → FI MIDI IN;
○ FI MIDI OUT → MIDI interface MIDI IN (assigned to FI Input Device).
Now go to the​ File ​ m enu and click ​ S elect Directory​ . Locate and select the folder
called "​ v 3_sounds​ " . If you don't already have this folder on your computer then you
need to go to ​
latest "Distribution Package".
h ttp://pandamidi.com/support​ and download it. It is contained in the
67