Effects Block - Panda-Audio Future Impact v3 User Manual

avoid clicks (especially on sudden large changes of MIDI value). (See Remark 2 in the ​
Implementation​ section for more details.)

Effects Block

This block contains three effects: Overdrive, EQ and Chorus. They can be used
simultaneously. Chorus is fixed at the end of the chain but the order of the other two can be
changed at will. The effects are fed by the INSTR and VCF outputs from the Main Mixer.
The panel for only ​ o ne ​ o f the three effects can be displayed at any one time. Click on one of
the three tabs (OVERDRIVE, EQUALIZER, CHORUS) above the panel to display that
effect's panel - that tab will now become light gray.
There are three sliders common to each of the effects. Moving from left to right they are as
follows:
● ON/OFF (ON/OFF):
Activates or bypasses the effect. When activated, the effect's tab will be illuminated
with a red border.
● INSTR (ON/OFF (EQ and Overdrive), 0...127 (Chorus)):
A blend control regulating how much of the dry input instrument signal from the Main
Mixer gets sent to the effect.
● VCF (ON/OFF (EQ and Overdrive), 0...127 (Chorus)):
A​ ​ b lend control regulating how much of the VCF signal from the Main Mixer gets sent
to the effect.
To the right of the three effects tabs there is a small icon which shows the effects chain
order. Clicking on this icon toggles between the two following options:
1.
2.
M IDI
37