1. Gaps can be filled w ith the Default - the slots in the FI corresponding to the
gaps will be overwritten with the lowest-numbered program in the directory;
2. Gaps can be s kipped - the slots in the FI corresponding to the gaps will be
ignored and the original programs in those slots will be untouched.
Instead of using L OAD e ach time you want to access a new program, you can simply
use the - a nd + buttons to quickly step through the programs within your selected
directory.
(The I NIT b utton is used to create an initialized program which serves as a useful
starting point for a new sound. It is discussed further in the section on
first
sound . )
● Save Program from FI to File: Allows you to save a single program from the FI to
your computer.
Note: Any modifications to a program's parameters made on the pedal using the
PARAMETER and EDIT dials will n ot be preserved when saving programs from the
FI to files. The program will be sent with those parameters at their default setting (5).
● Save All Programs from FI to Files: A llows you to save all 99 programs from the FI
to your computer.
Note: Unlike earlier versions, the programs in 3.0 format also store the first 32
characters of the filename in the FI; when you go to save a program from your FI to
your computer, the editor will suggest the original name of the file by default.
Firmware Update
● Firmware Update: Allows you to update the FI's firmware to the latest version, which
you should do whenever a new version is released.
You can update the FI firmware directly in your web browser (Chrome only) by going
to
h ttps://auraplug.com/fiupdate/start.html
Alternatively, you can download the latest firmware file from
http://pandamidi.com/support
The above four load/save/write file menu items
are also duplicated in the P ROGRAM panel at
the top left corner of the editor screen as L OAD ,
SAVE , W RITE ONE and W RITE ALL
respectively.
and following the on-screen instructions.
and save it to your computer. Once you have done this,
b uilding your
21