Midi Implementation - Panda-Audio Future Impact v3 User Manual

MIDI Implementation

The FI will respond to the following standard MIDI messages:
MIDI CC / Default Function in
Name
Note On
Note Off
Aftertouch
Velocity Keyboard velocity
control of filter cutoff
Pitch
Bend
Program
Change
1 LFO depth to VCF and
VCO
2 VCF volume of Main
Mixer
5 Portamento time
7 Final output volume of
FI
11 Filter cutoff
65 Portamento ON/OFF
66 FI ON/OFF
67 Program decrement
switch
69 FI ON/OFF toggle
Default
the FI Value
0*/127 *0 in SYNTH Mode only. See Remark 1
0*/127 *0 in EWI Mode only. See Remark 3
--- Active only in MIDI Mode. Also switches
the FI into MIDI mode.
--- Active only in MIDI Mode.
---
--- Active only in MIDI Mode.
--- Active only in MIDI Mode.
--- 1...99 for programs 1...99.
below.
127 See Remark 2 below.
below.
127 See Remark 4 below.
64 Duplication of CC74. See below.
127 If ≥64 then it switches ON; If <64, then it
switches OFF.
--- If ≥64 relay switches to ON If <64, relay
switches to OFF.
--- If ≥64 then program number first steps
down by one, then it starts scrolling (like
when holding the Program footswitch). If
<64 then it stops again.
--- If ≥64 then the FI flips between ON and
OFF. If <64 then the message is ignored.
Notes
51