COZY PILOT PRO Series Installation And Operating Instructions Manual page 25

WARNING: PLEASE USE CAUTION WHILE INSTALLING THE ELECTRICAL CONNECTION
FOLLOW STEP 10 IF THE PILOT PRO
IS ON THE LEFT SIDE OF THE HOUSING.
(Go back to step 9 if the Pilot Pro is on the right side of the housing).
Make certain wiring connections are tight before proceeding and
secured so they will not be able to contact high temperature locations.
STEP 10.
A. Route the wires around the back edge and inside the
heater housing. Bundle wires neatly with a cable tie (25)
attached to the Z-shaped bracket inside the liner.
B. Lead the bundle of wires through the gap between the
valve and valve bracket.
Do not allow the bundled wires to hang beyond the edge of
the valve bracket (C) and keep the bundled wires below the
lower part of the burner (D).
NOTE: Keep all wires away from the burner.
A
PILOT PRO ELECTRICAL CONNECTION
25
C
Page 25
D
C
27 B
25
...continue to page 26.
1018039-B