COZY PILOT PRO Series Installation And Operating Instructions Manual page 24

WARNING: PLEASE USE CAUTION WHILE INSTALLING THE ELECTRICAL CONNECTION
FOLLOW STEP 9 IF THE PILOT PRO
IS ON THE RIGHT SIDE OF THE HOUSING.
(Proceed to step 10 if the Pilot Pro is on the left side of the housing).
Make certain wiring connections are tight before proceeding and
secure so they will not be able to contact high temperature locations.
STEP 9.
A. Route the wires around the back edge & inside the heater
housing. Bundle wires neatly with a cable tie (25) attached to
the Z-shaped bracket inside the liner.
B. Bundle the wires against the valve bracket. Fix the wires in
place neatly by attaching them with a cable tie (25) to the
valve bracket (27).
Do not allow the bundled wires to hang beyond the edge of
the valve bracket (C) and keep the bundled wires below the
lower part of the burner (D).
NOTE: Keep all wires away from the burner.
1018039-B
PILOT PRO ELECTRICAL CONNECTION
D
27
25
Page 24
27
25
C
B
25
27
25
A
...continue to page 26.