Installation - COZY PILOT PRO Series Installation And Operating Instructions Manual

Step 14
Insert flame sensor (15)
into the same location as the
thermopile that was removed on
Step 13. Orient flat tab extending
from the bottom of the flame sensor
(15) parallel to the burner as shown.
Secure in place using the flame
sensor nut (26). Do not over-tighten
as flame sensor could crack!
Connect flame sensor wire (16)
to the blade connector at the base
of the flame sensor (15).
Step 15
Align the ignitor (14) with the top of
the pilot bracket as illustrated here.
Run the very long and thin #4 screw
(8) through the ignitor (14) and pilot.
Rotate the ignitor (14) as far away
from the burner as possible.
Secure these parts firmly in
place by adding the #4 nut (10).
View from above.

INSTALLATION

PILOT
ADJ
PILOT
15
26
PILOT
8
ADJ
14
10
Page 15
PILOT
15
16
14
1018039-B