Control Box Installation - Nortek Security & Control Mighty Mule MM372W Installation Manual

Step 1
3 '
M i
Step 2
● Once you've identified a suitable mounting location,
loosen the four cover screws and open the control
box cover.
● Locate mounting locations marked 'P' inside the
control box, and use them to mount the control box
with the supplied wood screws.
Step 3
14
MM371W / MM372W Installation Instructions

CONTROL BOX INSTALLATION

4 '
M a
n .
n .
M i
3 '
x .
● Identify a suitable mounting location for your control
box at least 3 ft. from the ground and no more than 4 ft.
from the primary operator.
Note: If you intend to install and use the MMS100
Wireless Connectivity System (sold separately) with your
gate operator, consider mounting your control box as
high as possible to improve radio performance.
Attenna
● Install the Antenna by screwing it in place on the
Cable
SMA connector.
● Orient the antenna to the sky, and securely tighten.
R
OR
R