Connecting The Operator(S) And Battery - Nortek Security & Control Mighty Mule MM372W Installation Manual

Step 1
● Remove the sealing nut from one of
the cable glands on the bottom of the
control box.
● Feed the operator wiring harness
through the sealing nut.
Step 2
● Insert the wire harness through the
cable gland into the control box at
least 3" to allow connection to the
operator wiring terminals.
● Secure the cable in place by
tightening the sealing nut.

CONNECTING THE OPERATOR(S) AND BATTERY

SEALING NUT
B
BAT+
BAT–
SW1
SW2
SECURE SEALING NUT
MM371W / MM372W Installation Instructions
RESET
LOCK AUX
15