Installing Warning Signs And Pedestrian Gates - Nortek Security & Control Mighty Mule MM372W Installation Manual

Important Safety Information

INSTALLING WARNING SIGNS AND PEDESTRIAN GATES

Warning signs alert people of automatic gate operation and are required when installing Mighty Mule Automatic Gate
Operators. A minimum of two WARNING SIGNS must be installed in the area of the gate. Each sign is to be visible by
persons located on the side of the gate on which the placard is installed.
The operator is intended for installation only on gates used for vehicles. Pedestrians must be supplied with a separate
access opening. The pedestrian access opening shall be designed to promote pedestrian usage. Locate the gate such that
persons will not come in contact with the vehicular gate during the entire path of travel of the vehicular gate.
We recommend using the Bulldog Pedestrian Gate Lock (Call the Nortek Security and Control Sales Department at 800-543-
4283) for controlled access.
Control Box
Bulldog Pedestrian
Gate Lock
(recommended, not included
Pedestrian Gate
Warning Signs
The gate operator is provided with two safety warning signs (four signs for dual operator installation).
The signs MUST be installed on the front and back of the gate where they will be visible in the area of
the gate.
Permanently secure each warning sign to the gate.
Immediately replace a damaged, eligible or missing warning sign.
Call Customer Service at 800-543-4283 for a free replacement.
viii
MM371W / MM372W Installation Instructions
Warning Sign
Vehicular Gate
Example of MM371W Installation
(Installations vary slightly on different types of gates)
)
7 foot
Warning Sign
minimum
Vehicular Gate
Example of MM372W Installation
(Installations vary slightly on different types of gates)
Pedestrian Gate Lock
(recommended, not included)
7 foot Pedestrian Gate
minimum
Warning Sign
Vehicular Gate
Control Box
!