Auto Close Setting; Optional Smart Control Setup - Nortek Security & Control Mighty Mule MM372W Installation Manual

Step 1
● The auto close timer is set to OFF
from the factory.
● To set an auto close timer, use a
small flat head screw driver to
turn the auto close potentiometer
clockwise.
● The timer can be set from
approximately 3 seconds to a
maximum of 120 seconds.
Step 2
● If you have additional accessories
or external devices to install, see
the following page.
● Unless you have additional
external accessories to install,
your gate operator installation is
now complete.
● Please review the installation
checklist at the end of this
manual.
● Use a phillips head screwdriver to
close the control box.
This product has the ability of being control via a smart device (i.e. smartphone) with the addition of the MMS100 smart kit. Refer to
the instructions contained in the MMS100 kit or visit
22
MM371W / MM372W Installation Instructions

AUTO CLOSE SETTING

Optional Smart Control Setup

www.mightymule.com for more information