Gossen MetraWatt SECUTEST BASE Operating Instructions Manual page 6

➭ Quit the current applications before continuing the update.
Select either all applications or the one shown on the display
in each case and press the button „Stop selected applica-
tions".
The message above is shown if your test instrument has not yet
been switched on or is not yet connected with your PC via the
USB port.
Note
Please note that only one test instrument at a time may
be connected with your PC.
6
As soon as the program has recognized the connected test instrument,
the characteristics such as device type and serial number as well as the
firmware version are shown for verification purposes.
➭ By clicking on the „Update" button the update process with
the test instrument is launched.
One after the other, the initialization of header section, measure-
ment section and other files is started.
Progress bars are shown for the overall process and the respec-
tive individual test.
GMC-I Messtechnik GmbH