Starting The Firmware Update Tool; Testing The Files On Your Pc And In The Test Instrument - Gossen MetraWatt SECUTEST BASE Operating Instructions Manual

3.2

Starting the Firmware Update Tool

3.2.1 Testing the Files on your PC and in the Test Instrument

The update process is automatically launched when installing the
Firmware Update Tool for the first time.
However, if you wish to update several test instruments succes-
sively with the latest firmware, the software, once installed, can be
started by double-clicking on the following icon in the menu bar or
on the desktop.
Firmware Update Tool
Note
Please note that upon each new firmware version a new
Firmware Update Tool has to be downloaded from our
homepage and installed on your PC.
The start screen appears.
➭ Select the requested language for the user interface of the
software and confirm with „OK".
➭ It is imperative that you back up the data of your test instru-
ment before you confirm this request with OK in order to
launch the update process.
GMC-I Messtechnik GmbH
➭ Please read the safety instructions listed above without fail.
Confirm by ticking the box in the last line. The software then
starts to check the applications on your PC.
A progress bar is shown.
Note
If you have opened any programs which may interfere
with the installation process, you will be prompted to
close them.
5