Table of Contents
Advertisement
Page 8
6.
Lower the universal bracket bar with attached
display into the cradle (as shown to the left).
Nylon
Sleeve
After loosening the tension bolts, be sure that
the nose piece is held together tightly before
rotating.
Knurl Knob Mounting Point/M6 x 12mm Security Head and
M6 Lock Washer Mounting Point.
7.
Insert an M6 Knurl Knob/M6 x 12mm Security
Head and M6 Lock Washer into the knurl knob/
security screw mounting point and tighten.
To access the knurl knob/security screw
location while the display is attached, the
PFW 6854 must be rotated to the "portrait"
position (vertical position
8.
Tighten the two (2) Phillips head screws (located
on the side of the mounting block) once the final
position is attained.
Locking Screws
PFW 6854
Installation Instructions
Advertisement
Table of Contents
