Table of Contents
Advertisement
RUGGEDCOM WIN7000
Installation Guide
Introduction
The WIN7000 High Power Base Station is a member of the RUGGEDCOM WIN family, a line of mobile WiMAX
broadband wireless access systems based on the 802.16e mobile WiMAX standard. RUGGEDCOM systems are
designed for robustness and simplicity, offering feature-rich services with low deployment and operation costs.
The WIN7000 is a member of a line of mobile WiMAX broadband wireless access systems based on the 802.16e
mobile WiMAX standard. These systems are designed for robustness and simplicity, offering feature-rich services
with low deployment and operation costs.
The WIN7000 is a cost-effective solution for wireless access services, designed for point-to-multipoint broadband
wireless access applications in varying conditions and locations. It is a one-sector base station.
The base station communicates with fixed and mobile subscriber units, according to defined service criteria and
customer service level agreements. The WIN7000 also connects to the service provider backbone, supporting
end-to-end Quality of Service (QoS) requirements.
The system uses OFDMA radio technology, providing robustness in adverse channel conditions and enabling
Non-Line-Of-Sight (NLOS) operation. This improves coverage and maintains a high level of spectral efficiency.
Modulation and coding are continuously adapted to prevailing link conditions, ensuring an optimal balance
between robustness and efficiency. The use of STC/MRC and MIMO radio technologies optimizes link
performance, ensuring enhanced bandwidth and service coverage.
The RUGGEDCOM WIN7000 is a full outdoor base station, designed for easy installation and mounting on poles,
street lamps, towers, or walls. The WIN7000 can be equipped with copper or fibre network interfaces for flexible
integration into the operator's backbone.
The WIN7000 is supported by RUGGEDCOM NMS, Siemens's comprehensive Network Management System.
Section 1.1
About this Guide
This installation guides describes the installation of the WIN7000 High Power Base Station.
This guide is intended for use by base station installers and operators, and assumes readers have a working
knowledge of WiMAX technologies and procedures. While some safety precautions are reviewed here, it
is assumed that installers are trained in safe installation practices. Users unfamiliar with safe installation
procedures, WiMAX technologies, and service procedures should not rely on this manual for comprehensive
guidance.
Section 1.2
Capabilities and Features
The WIN7000 provides the full base station functionality necessary for serving a single sector:
• Supported Frequency Bands: 5251, 5151, 7251
• All-outdoor, single-box installation
• IEEE802.16e Wave2 Standard Compliance
About this Guide
Chapter 1
Introduction
1
Advertisement
Table of Contents
