Wireless Designer Software; Firmware Update Instructions - Lectrosonics M2T-X Series Instruction Manual

M2T-X
Wireless Designer
Software
Download the Wireless Designer software installer from
the web sites under the SUPPORT tab at:
http://www.lectrosonics.com/US
Wireless Designer only needs to be installed the first
time the software is used. Once the software is in-
stalled, updates are available by simply clicking on an
item in the Help Menu.
NOTE: If Wireless Designer is already installed,
you must uninstall it before attempting to install a
new copy.
Firmware Update
Instructions
Firmware updates are made with a file downloaded
from the web site and the M2T connected via USB.
The USB port on the transmitter requires a micro-B
male plug on the connecting cable. The other end of
the cable would normally be a USB A-Type male con-
nectorto fit the most common type of USB jack used on
computers.
Refer to Help in Wireless Designer software for the
procedure.
12 LECTROSONICS, INC.