Menu Item Descriptions; Rf Enable/Level; Rf Tuning; Sync Scan - Lectrosonics M2T-X Series Instruction Manual

Menu Item Descriptions

RF Enable/Level

Allows RF transmission to be turned on and off and set
RF levels at 10, 25 or 50 mW.
NOTE: Simultaneous long press of A1/A2 (TX
A) or B1/B2 (TX B) will also enable or disable RF
from main screen.

RF Tuning

Allows manual selection of the operating frequency.

Sync Scan

Receive frequency scan via IR port or tune transmitters
manually.
Screen will alert user if scan is unsuccessful.
Rio Rancho, NM

Sync Settings

Allows sending or retrieving setup data, including fre-
quency, name and talkback settings, via the IR port.
Sync options: Choose to send frequency, send all
settings, retrieve (get) frequency or retrieve (get) all
settings from a receiver. Use the UP and DOWN ar-
rows to select a function and MENU/SEL to initiate
sync.

Sync Key

Send or retrieve (get) encryption keys.

Audio Level/Trim

Set audio inputs at correct levels.
Easily switch between
channels with A1, A2, B1
or B2 Buttons.

Audio Input Type

Set independent channels to analog or digital (Dante),
if available.
NOTE: When selecting a Dante input, user must be
familiar with the Dante Controller from Audinate.
Digital IEM Transmitter
9