Wireless Designer Software; Firmware Update Instructions - Lectrosonics DBu Instruction Manual

DBu
Wireless Designer
Software
Download the Wireless Designer software installer from
the web sites under the SUPPORT tab at:
http://www.lectrosonics.com/US
http://www.lectrosonics.com/europe/
Wireless Designer only needs to be installed the first
time the software is used. Once the software is in-
stalled, updates are available by simply clicking on an
item in the Help Menu.
Note: If Wireless Designer is already installed, you
must uninstall it before attempting to install a new
copy.
Firmware Update
Instructions
Firmware updates are made with a file downloaded
from the web site and the DBu connected via USB.
The USB port on the transmitter requires a micro-B
male plug on the connecting cable. The other end of
the cable would normally be a USB A-Type male con-
nectorto fit the most common type of USB jack used on
computers.
USB Port
Refer to Help in Wireless Designer software for the
procedure.
18 LECTROSONICS, INC.