Table of Contents
Advertisement
Option EXM, External Mixing Upgrade Kit, Serial Prefix = MY/SG/US5233 or ≥ MY/SG/US5606
9. Refer to the data in
that the part number is NOT either E6607-61002 or E6607-61004. If the part number is
E6607-61002 or E6607-61004, do not proceed with the installation of this kit. Additional
hardware is required.
10.Refer to the data in
N9020A-CRP installed, verify that it also has a Front End Controller with Hw Id of 75. If the
Front End Controller has a Hw Id of 75, you do not need to perform the Replace Front End
Controller procedure.
Update Instrument Software
Updating the instrument software and installing the necessary licenses before installing the new
hardware will help ensure that the hardware installation was successful.
Go to the following website and determine whether or not the analyzer has the latest instrument
software already installed:
http://www.keysight.com/find/xseries_software
If the analyzer does not have the latest instrument software already installed, download and install
the latest version.
Installation Note N9020-90229
step 4
above. Verify that the Front End assembly has a HW ID of 70 and
step 3
and
step 4
above. If the analyzer has N9020A-CR3 and/or
7
Advertisement
Table of Contents
