Table of Contents
Advertisement
Option EXM, External Mixing Upgrade Kit, Serial Prefix = MY/SG/US5233 or ≥ MY/SG/US5606
5. Refer to
Figure
26. Place the rear panel (1) into position in the chassis. Replace the screws (2)
to attach the rear panel to the chassis. Torque to 9 inch-pounds.
Figure 26
Rear Panel Replacement
6. In the upgrade kit, locate the Warning Label, N9030-80018.
7. Refer to
Figure
27. Attach the Warning Label to the top brace as shown.
32
Installation Note N9020-90229
Advertisement
Table of Contents
