Table of Contents
Advertisement
Option EXM, External Mixing Upgrade Kit, Serial Prefix = MY/SG/US5233 or ≥ MY/SG/US5606
3. Refer to
Figure
11. Install the Enhanced Front End Control assembly included in this kit into
slot 6 in the chassis securing with the ejector.
4. Refer to
Figure
10. Reattach the ribbon cables W16, W17, and W18 to the Front End Control
assembly (1).
5. If the analyzer does not have Option 503, reconnect W22 wire harness to the Front End Control
assembly (1).
Figure 11
Enhanced Front End Control Assembly Installation
Installation Note N9020-90229
19
Advertisement
Table of Contents
