Section 4
Analog and binary signal transfer for line differential protection
IEC10000243 V1 EN-US
Figure 48: An example of selected hardware channels
When a User Defined Name is given for the selected Hardware Channel, it will also become
visible in SMT (see Figure 49).
IEC10000244 V1 EN-US
Figure 49: User Defined Name in SMT
4.8.2.2
Configuration of binary inputs and outputs via SMT
Configuration of binary input signals (SMBI) and binary output signals (SMBO) is done via SMT
by selecting the respective tab.
46
IEC10000244-1-en.vsdx
© Copyright 2017 ABB. All rights reserved
1MRK 505 382-UEN E
IEC10000243-1-en.vsdx
GUID-34EC440E-6D10-4FB5-A860-383D18220017 v1
Communication set-up, 670/650 series
Application Guide