Section 1
Introduction
For example, to save the changes in non-volatile memory, select Yes and press
•
Parameter names are shown in italics.
For example, the function can be enabled and disabled with the
•
Each function block symbol shows the available input/output signal.
•
•
•
Dimensions are provided both in inches and millimeters. If it is not specifically mentioned
then the dimension is in millimeters.
10
the character ^ in front of an input/output signal name indicates that the signal
name may be customized using the PCM600 software.
the character * after an input signal name indicates that the signal must be
connected to another function block in the application configuration to achieve a
valid application configuration.
© Copyright 2017 ABB. All rights reserved
1MRK 505 382-UEN E
Operation setting.
Communication set-up, 670/650 series
Application Guide
.