StorNext QM1200, QS1200 or QS2400 Base System - Replacing a Controller Battery
6.
Set the controller canister on a flat, static-free surface, with the release lever up.
7.
Insert the controller air blocker
maintained.
Figure 6 Inserting the Controller Air Blocker into the Open Controller Slot
ATTENTION Possible equipment damage – The controller slot cannot remain open for more than three
minutes because of the possibility of overheating the equipment. The controller air blocker fills the
controller slot so that the equipment will not overheat.
(Figure
6) into the open controller slot to make sure that correct airflow is
Quantum Corporation
- 5 -
April 2015