Safety Instructions; Safety Instructions For Battery Charger And Battery - Signode BXT 10 Operation, Parts And Safety Manual

BUY AT ALLSTRAP (866) 779-2673
3
Inform yourself!
Read the operating instructions
carefully.
Preventive and corrective main-
tenance on the tool may only be
carried out by trained personnel.
Protect yourself!
When operating the tool, wear
eye, face and hand protection
(cut-proof gloves).
Power source!
Before starting preventive or
corrective maintenance, remove
battery from the tool.
Warning:
Strap will snap forward!
When cutting the strap, hold the
upper portion and stand safely
away from the strap.
Caution:
The lower strap will snap
forward.
Warning:
Strap could break!
Do not stand in line with the strap
while it is tensioned. The strap
could break!
Caution:
Only strap packed goods!
Do not put hands or other parts of
the body between the strap and
the package during the strapping
process.
Caution:
Danger of squeezing!
Do not put your fi ngers into the
tension wheel area.
Do not use water!
Do not use water or steam to
clean the tool.
05.07
WARNING

SAFETY INSTRUCTIONS

Use for the intended purpose
This tool is designed for strapping packages, pallet
loads and the like.
The tool was designed and manufactured to provi-
de safe handling during the strapping operation.
The tool is designed for use with plastic straps
(polypropylene and polyester).
Possible misuse
The use of steel straps is not possible.
3.1 SAFETY INSTRUCTIONS FOR
BATTERY CHARGER AND BATTERY
• Do not charge other types of batteries (see
chapter 5.1) and use original accessories only.
• Keep the battery charger slot free of foreign
objects and protect against dirt.
• Protect the battery charger against humidity and
use it in dry areas only.
• Do not open the battery. Protect the battery
against impact, heat and fi re. Risk of explosion!
• When the battery is outside the battery charger,
cover its battery terminals to avoid short circuits
with metal objects. Risk of fi re and explosion!
• Keep battery dry and protected against frost. Do
not store it at temperatures over 50°C (122°F) or
below 10°C (50°F).
• Damaged batteries should not be used longer.
5
Original spare parts must be
used exclusively!
Not using original spare parts
will dissolve the warranty and
the liability.
Always inspect the electrical plug
and cable before use. If damaged,
they must be replaced by qualifi ed
personnel.