Nord Drivesystems NORDAC FLEX SK 210E Series Brief Instructions page 56

NORDAC FLEX (SK 200E ... SK 235E) – Brief instructions for Frequency Inverters
Motor data for IE2 and IE3 motors is provided by the NORD CON software. The required data record
can be selected and imported into the variable frequency drive with the aid of the "Import motor
parameter" function (also refer to the manual for the NORD CON software
Pos : 223 /Anleitungen/El ektr oni k/FU und Starter/1. Allgemei nes /Sic herheits- und Ins tall ations hinweis e und Warn- Gefahrenhinweise/neu/War n- und Gefahrenhinweise/Informati on - Doppel bel egung DIN 2 und DIN 3 [SK 2xxE] @ 19\mod_1511860681545_14638.doc x @ 2373600 @ @ 1
Information
Digital inputs DIN2 and DIN3 are used for 2 different functions:
1. for digital functions that can be parameterized (e.g. "enable left"),
2. for evaluation of an incremental encoder.
Both functions are coupled by an OR link.
Evaluation of an incremental encoder is always activated. This means that when an incremental encoder is
connected, make sure that the digital functions are switched off (parameter (P420 [-02] and [-03]) or with DIP
switch (please see chapter 4.2.2.2 "DIP switches (S1)" on page 59)).
Pos : 224 /Anleitungen/El ektr oni k/FU und Starter/1. Allgemei nes /Sic herheits- und Ins tall ations hinweis e und Warn- Gefahrenhinweise/neu/War n- und Gefahrenhinweise/Informati on - Vorrang DIP - Schalter [SK 2xxE] @ 19\mod_1511862534906_14638.doc x @ 2373682 @ @ 1
Information
Please note that DIP switch settings on the variable frequency drive (S1) have priority over parameter settings.
The settings of integrated potentiometers P1 and P2 must also be taken into consideration.
Pos : 226 /Allgemein/Allgemeingültig e Module/---------Seitenumbr uc h kompakt --------- @ 13\mod_1476369695906_0.doc x @ 2265496 @ @ 1
56
DIN 2 and DIN 3 double allocation
DIP switch priority
BU 0000).
BU 0240 en-US-3118