2.3
SSD Installation
Follow the instructions below to install a solid state drive. Please follow these steps
carefully. (Note: The system is not compatible with a 12 V SSD. Only install SSDs
with a power input of less than 12 V.)
1.
Undo the 4 x affixing screws and remove the rear cover.
2.
Remove the 4 x SSD screws in the rear cover.
3.
Connect the SATA/power cable.
4.
Replace the rear cover and secure in place with 4 x screws.
Note!
MIC-1816 features only one SSD SATA slot.
7
MIC-1816 User Manual