Samson TROVIS 5724-8 Mounting And Operating Instructions page 40

Appendix
CO/PA Function/
designation
M1 Control mode
M2 Direction of action
Internal limit LIM1/Internal limit LIM2
LIM1.S/ Source
LIM2.S
LIM1.F/ Function
LIM2.F
LIM1.P/ Switching point
LIM2.P
LIM1.H/ Hysteresis
LIM2.H
40
Setting/
adjustment range
7: Controller [1] active when DI3 = off / Controller
[2] active when DI3 = on
8: Controller [1] active when DI4 = off / Controller [2]
active when DI4 = on
9: Cascade
0: >> (increasing/increasing)
1: <> (increasing/decreasing)
1: Measured value AI1
2: Measured value AI1 after function generation
3: Measured value AI2
4: Measured value AI2 after function generation
5: Measured value AI3
6: Measured value AI3 after function generation
7: Measured value AI4
8: Measured value AI4 after function generation
9: Actual value [1] before comparator
10: Set point [1] before comparator
11: Set point deviation [1] before comparator
12: Actual value [2] before comparator
13: Set point [2] before comparator
14: Set point deviation [2] before comparator
15: Set point from program controller
0: None
1: Source (signal) ≤ LIM1
Source (signal) ≤ LIM2
2: Source (signal) ≥ LIM1
Source (signal) ≥ LIM2
–50 to +150 °C
0.5 to 10.0 °C
EB 5724-8 EN